{"title":"HOHO","description":"","products":[{"product_id":"hoho-classic-series-window-heat-rejection-film-hq-9045-blue-color-block-99-of-the-suns-uv-radiation-30mx1-52m","title":"HOHO Classic Series Window Heat Rejection Film HQ-9045 Blue Color - Block 99% of the Sun's UV Radiation 30Mx1.52M","description":"\u003cp\u003eThickness: 2mil\u003cbr\u003eVLT: 86%\u003cbr\u003eIR REJECTION: 53%\u003cbr\u003eVLR: 9%\u003cbr\u003eUV REJECTION: 99%\u003cbr\u003eTSER: 31%\u003cbr\u003eGlare Reduction: 20%\u003cbr\u003eSR Hardness: \u0026gt;2H\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE RECOMMENDATION \u003c\/strong\u003eCar Sunroofs, Rear Windows, Building \u0026amp; Home Single- or Dual-Pane Glass, Bedroom Glasses. \u003cbr\u003eBathrooms, Smoth Glass, Single- or Dual-Pane Glass, Panels With Low-E Coatings, Plexiglas and Acrylic Windows, Wired, Textured, or Patterned Glass\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO APPLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1) Thoroughly clean the window the film will be applied to.\u003cbr\u003e2) Cut your film to size of the window, adding an extra 2cm to the width and height.\u003cbr\u003e3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the soapy water solution. (Tip: If you cannot remove the clear lining film, attach a piece of sticky tape to either side of the film at one corner and peel away from each other.).\u003cbr\u003e4) Spray the glass with the soapy water\u003cbr\u003e5) Apply the adhesive side of the film onto the glass and slide into position\u003cbr\u003e6) Spray the face of the film with the soapy water and, using a squeegee or credit card wrapped in paper towel, squeegee out all the soapy water from behind the film\u003cbr\u003e7) Trim off any excess film using a sharp knife for a neat finish\u003c\/p\u003e\n\u003cp\u003e\n\u003cscript src=\"chrome-extension:\/\/bincmiainjofjnhchmcalkanjebghoen\/aiscripts\/script-main.js\"\u003e\u003c\/script\u003e\n\u003c\/p\u003e\n\u003cdiv id=\"ag-1753191756869\"\u003e\u003c\/div\u003e","brand":"Dm ki dukan","offers":[{"title":"Default Title","offer_id":42706985844796,"sku":null,"price":0.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/2839\/7884\/files\/WhatsAppImage2025-07-17at3.02.05PM.jpg?v=1752748507"},{"product_id":"hoho-ppf-paint-protection-film-tph-7-5-mil-tph-xl-15mx1-52m","title":"HOHO PPF (Paint Protection Film) TPH Glossy 15Mx1.52M","description":"\u003cp\u003e\u003cstrong\u003eITEM DESCRIPTION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThickness: 2mil\u003cbr\u003eVLT: 86%\u003cbr\u003eIR REJECTION: 53%\u003cbr\u003eVLR: 9%\u003cbr\u003eUV REJECTION: 99%\u003cbr\u003eTSER: 31%\u003cbr\u003eGlare Reduction: 20%\u003cbr\u003eSR Hardness: \u0026gt;2H\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE RECOMMENDATION\u003c\/strong\u003e Car Body, Plane, Boats, and Wood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO APPLY\u003c\/strong\u003e Step 1: Cut and Align the Film\u003cbr\u003eStart by cutting the PPF to fit a particular area on your vehicle that requires coverage. Ensure accuracy and obtain templates, if available, that match the contours and edges of your car. Make sure there are no misalignments on film when it is laid properly\u003cbr\u003eStep 2: Activate the Adhesive\u003cbr\u003ePrepare a slip solution with Kadeli PPF Installation GEL (a mixture of water and a small amount of baby shampoo) and spray it on the adhesive side of the film. This solution eases movement and positioning of film on vehicle surfaces so that finer adjustment can be done without immediate adhesion.\u003cbr\u003eStep 3: Apply the PPF\u003cbr\u003ePlace adhesive side onto the painted bodywork. Start from one end to another gently using a squeegee to smooth out overlying material and correct any wave or ripple tendency. There should be no air bubbles or wrinkles which can mar the finish at this stage.\u003cbr\u003eStep 4: Squeegee Out the Solution\u003cbr\u003eUse firm, overlapping strokes with a squeegee to push out the slip solution as well as air trapped under it. Begin from the center going towards external sides. This makes sure that it doesn’t have pockets where air or moisture could be trapped, hence securing it firmly against car paintwork.\u003cbr\u003eStep 5: Heat and Dry the Film\u003cbr\u003eTake a heat gun and run it across your wetted film very slowly so that its adhesive properties become active. This will also enable its flexibility according to different parts of vehicles’ body shapes. The film should be completely dry before confirming its attachment, especially around edges,s including seams, for good reasons like they lift easily.\u003cbr\u003eStep 6: Inspect and Trim Excess Film\u003cbr\u003eFinally, look for blemishes or unsealed areas in films cut out by yourself, not leaving any excess, just perfectly fitting what remains for having the best results possible hereafter. Check whether all corners were sealed tight enough, preventing them from peeling off later, either because they came loose initially during the installation process, or due mainly to improper bonding procedures used.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"ag-1753192008139\"\u003e\u003c\/div\u003e","brand":"Dm ki dukan","offers":[{"title":"Default Title","offer_id":42706985943100,"sku":null,"price":0.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/2839\/7884\/files\/WhatsApp_Image_2025-07-17_at_12.27.52_PM.jpg?v=1752748628"},{"product_id":"hoho-ppf-paint-protection-film-tpu-k180-15mx1-52m","title":"HOHO PPF (Paint Protection Film) TPU-K180 15Mx1.52M","description":"\u003cp\u003e\u003cstrong\u003eITEM DESCRIPTION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHOHO PPF TPU-K180 15Mx1.52M \u003cbr\u003eHOHO paint protection film K series is a high-performance and self-adhesive thermoplastic polyurethane in transparent clear gloss designed to protect a vehicle's finish against stone chips, road debris, insect stains, small to medium scratches, chemical stains, and weathering without degrading the original paint. \u003cbr\u003eHeat Activated Self-Healing Topcoat:\u003cbr\u003eConstructed from an elastomeric polyurethane, HOHO TPU-K180 will self-heal light scratches \u0026amp; swirl marks when heat is applied to the film's surface.\u003cbr\u003eNon-Yellowing:\u003cbr\u003eOur proprietary film formulation will not yellow from UV exposure, ensuring protected areas are nearly invisible.\u003cbr\u003eDiscoloration \u0026amp; Stain Resistant:\u003cbr\u003eDon't worry about specs, spots, or splotches from contaminants. HOHO is stain resistant \u0026amp; will maintain clarity under the harshest conditions.\u003cbr\u003eMaximum Durability \u0026amp; Protection:\u003cbr\u003eAs the thickest film in the line-up, it provides improved impact protection and enhanced durability.\u003cbr\u003eEdge Seal Technology:\u003cbr\u003eLifting \u0026amp; delamination are a thing of the past. Our signature Edge Seal Technology ensures film stays stuck \u0026amp; keeps surfaces protected from contaminants.\u003cbr\u003eWarranty 3 Years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO APPLY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStep 1: Cut and Align the Film\u003cbr\u003eStart by cutting the PPF to fit a particular area on your vehicle that requires coverage. Ensure accuracy and obtain templates, if available, that match the contours and edges of your car. Please make sure there are no misalignments on film when it is laid properly\u003cbr\u003eStep 2: Activate the Adhesive\u003cbr\u003ePrepare a slip solution with Kadeli PPF Installation GEL (a mixture of water and a small amount of baby shampoo) and spray it on the adhesive side of the film. This solution eases movement and positioning of film on vehicle surfaces so that finer adjustment can be done without immediate adhesion.\u003cbr\u003eStep 3: Apply the PPF\u003cbr\u003ePlace adhesive side onto the painted bodywork. Start from one end to another gently using a squeegee to smooth out overlying material and correct any wave or ripple tendency. There should be no air bubbles or wrinkles which can mar the finish at this stage.\u003cbr\u003eStep 4: Squeegee Out the Solution\u003cbr\u003eUse firm, overlapping strokes with a squeegee to push out the slip solution as well as air trapped under it. Begin from center, going towards the external sides. This makes sure that it doesn’t have pockets where air or moisture could be trapped, hence securing it firmly against car paintwork.\u003cbr\u003eStep 5: Heat and Dry the Film\u003cbr\u003eTake a heat gun and run it across your wetted film very slowly so that its adhesive properties become active. This will also enable its flexibility according to different parts of vehicles’ body shapes. The film should be completely dry before confirming its attachment, especially around edges, including seams, for good reasons, like they lift easily.\u003cbr\u003eStep 6: Inspect and Trim Excess Film\u003cbr\u003eFinally, look for blemishes or unsealed areas in films cut out by yourself, not leaving any excess, just perfectly fitting what remains for having the best results possible hereafter. Check whether all corners were sealed tight enough, preventing them from peeling off later, either because they came loose initially during the installation process, or due mainly to improper bonding procedures used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACES RECOMMENDATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCar Body, Plane, Boats, and Wood\u003c\/p\u003e\n\u003cp\u003e\n\u003cscript src=\"chrome-extension:\/\/bincmiainjofjnhchmcalkanjebghoen\/aiscripts\/script-main.js\"\u003e\u003c\/script\u003e\n\u003c\/p\u003e\n\u003cdiv id=\"ag-1753194101596\"\u003e\u003c\/div\u003e","brand":"DM","offers":[{"title":"Default Title","offer_id":43326658510908,"sku":null,"price":0.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/2839\/7884\/files\/WhatsAppImage2025-07-17at12.27.52PM.jpg?v=1753193153"},{"product_id":"hoho-ppf-paint-protection-film-tpu-x8-pro-7-5-mil-15mx1-52m","title":"HOHO PPF (Paint Protection Film) TPU X8 PRO 7.5 MIL 15Mx1.52M","description":"\u003cp\u003e\u003cstrong\u003eITEM DESCRIPTION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHOHO PPF TPU X8 PRO 7.5 MIL 15Mx1.52M \u003cbr\u003eHOHO paint protection film K series is a high-performance and self-adhesive thermoplastic polyurethane in transparent clear gloss designed to protect a vehicle's finish against stone chips, road debris, insect stains, small to medium scratches, chemical stains, and weathering without degrading the original paint. \u003cbr\u003eHeat Activated Self-Healing Topcoat:\u003cbr\u003eConstructed from an elastomeric polyurethane, HOHO X8 PRO will self-heal light scratches \u0026amp; swirl marks when heat is applied to the film's surface.\u003cbr\u003eNon-Yellowing:\u003cbr\u003eOur proprietary film formulation will not yellow from UV exposure, ensuring protected areas are nearly invisible.\u003cbr\u003eDiscoloration \u0026amp; Stain Resistant:\u003cbr\u003eDon't worry about specs, spots, or splotches from contaminants. HOHO is stain resistant \u0026amp; will maintain clarity under the harshest conditions.\u003cbr\u003eMaximum Durability \u0026amp; Protection:\u003cbr\u003eAs the thickest film in the line-up, it provides improved impact protection and enhanced durability.\u003cbr\u003eEdge Seal Technology:\u003cbr\u003eLifting \u0026amp; delamination are a thing of the past. Our signature Edge Seal Technology ensures film stays stuck \u0026amp; keeps surfaces protected from contaminants.\u003cbr\u003eWarranty 5 Years\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACES RECOMMENDATION \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCar Body, Plane, Boats, and Wood\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO APPLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStep 1: Cut and Align the Film\u003cbr\u003eStart by cutting the PPF to fit a particular area on your vehicle that requires coverage. Ensure accuracy and obtain templates, if available, that match the contours and edges of your car. Please make sure there are no misalignments on film when it is laid properly\u003cbr\u003eStep 2: Activate the Adhesive\u003cbr\u003ePrepare a slip solution with Kadeli PPF Installation GEL (a mixture of water and a small amount of baby shampoo) and spray it on the adhesive side of the film. This solution eases movement and positioning of film on vehicle surfaces so that finer adjustment can be done without immediate adhesion.\u003cbr\u003eStep 3: Apply the PPF\u003cbr\u003ePlace adhesive side onto the painted bodywork. Start from one end to another gently using a squeegee to smooth out overlying material and correct any wave or ripple tendency. There should be no air bubbles or wrinkles which can mar the finish at this stage.\u003cbr\u003eStep 4: Squeegee Out the Solution\u003cbr\u003eUse firm, overlapping strokes with a squeegee to push out the slip solution as well as air trapped under it. Begin from the center, going towards external sides. This makes sure that it doesn’t have pockets where air or moisture could be trapped, hence securing it firmly against car paintwork.\u003cbr\u003eStep 5: Heat and Dry the Film\u003cbr\u003eTake a heat gun and run it across your wetted film very slowly so that its adhesive properties become active. This will also enable its flexibility according to different parts of vehicles’ body shapes. The film should be completely dry before confirming its attachment, especially around edges, including seams, for good reasons, like they lift easily.\u003cbr\u003eStep 6: Inspect and Trim Excess Film\u003cbr\u003eFinally, look for blemishes or unsealed areas in films cut out by yourself, not leaving any excess, just perfectly fitting what remains for having the best results possible hereafter. Check whether all corners were sealed tight enough, preventing them from peeling off later either because they came loose initially during the installation process due mainly to improper bonding procedures used.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"ag-1753194443351\"\u003e\u003c\/div\u003e","brand":"DM","offers":[{"title":"Default Title","offer_id":43326701109308,"sku":null,"price":0.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/2839\/7884\/files\/WhatsAppImage2025-07-17at12.27.52PM.jpg?v=1753193153"}],"url":"https:\/\/dmestore.pk\/collections\/hoho.oembed","provider":"DM","version":"1.0","type":"link"}